Epson Equity IIe User Manual page 49

WARNING
Be sure to remember the password you enter or write it
down and keep it in a safe place. If you cannot remember
the password you enter now, you will not be able to
access the computer the next time you turn it on.
If you want to return to the password submenu without
saving any changes, press
After you enter a password, press
4.
password submenu.
5. Highlight
server mode from off to on or vice versa, press
The Setup program requires a power-on password to turn
network server mode on. If you did not enter a password,
this message appears:
To enter a password, highlight
and follow steps 3 and 4 above.
6. After you enter a power-on password and turn network
server mode on or off, highlight
Setup menu.
Note
If you forget your password, there is a way to disable the
password function. See "Password Problems" in Appendix A
for instructions.
E .
SC
* * * * and press
Enter
Running the Setup
to return to the
Enter
To turn network
Enter.
to return to the main
Program 2-13