Resuming From an Error
If an error occurs during a test, the test stops at that point, and
an error code and error message appear. If you want to record
the problem, you can print out the message on your printer.
You see this prompt:
Do you want a printout of the error
message(s)
To continue without printing the error message, press
Enter.
Before you request a printout, be sure your printer is turned on
and online, and the paper is installed correctly. Then press Y
and
Enter.
and prompt appear:
Printer is not installed correctly.
Install, correctly and enter Y, or
Enter N to cancel printing.
Correct the problem and press
printing, or press
After printing the error message, the program displays this
prompt:
Printout is finished. Press ENTER to
return to the menu.
The program continues after an error in one of the following
ways:
It returns to the DEVICE LIST, or
If you are running multiple tests and are not terminating on
an error, the program repeats the test that caused the error.
(Y/N)
If the printer is not ready, the following message
N and Enter
?
and
to continue
Y
Enter
to cancel printing.
and
N