Resuming From An Error - Epson Apex 110 User's Manual And Diagnostics

You can specify that the test be performed one time only or any number
of times in the range from 1 to 9999. Running a test multiple times is for
reliability testing of essential functions only; in most cases, running a test
only once is sufficient.
To perform the test
a submenu of more detailed tests for the device you are checking.
To perform the test multiple times, press
prompt:
Terminate checking if an error detected (Y/N)?
Press and
Y Enter
press
N and Enter
Y see this prompt:
OU
How
many times
Type the number of times you wish to repeat the test, then press
tests for the device now start.

Resuming from an error

If an error occurs during a test, the test stops at that point, and an error
code and error message are displayed. If you want to record the problem,
you can print out the message on your printer. You see this prompt:
Do you want a printout of the error message(s)
(Y/N)?
To continue without printing the error
Before you request a printout, be sure your printer is turned on and
on-line, and the paper is installed correctly. Then press
printer is not ready, the following message and prompt arc displayed:
Printer is not installed correctly.
Install correctly and enter Y, or
Enter N to cancel printing.
Correct the the problem
and Enter
to cancel printing.
After printing the error message, the program displays this prompt:
Printout is finished. Press ENTER to return to
the menu.
only, press
once
to terminate checking if the device produces an error, or
to repeat the tests regardless of an error.
(1-9999) :
press
and Y and Enter
then
1 Enter.
2 and Enter.
press
message,
to, continue printing, or press
The program displays
You see this
Enter.
N and Enter.
and
Y Enter.
The
If the
N
5-5