Changing The Math Coprocessor Setting - Epson Equity IIe User Manual

If this does not work, try loading the program at 8 MHz and
then switch to 12 MHz to run it, Do not enable the Auto
speed function.
Follow these steps to change the Auto speed setting:
1. At the main Setup menu, highlight
press
Enter.
** SAVE SETTING **
If the displayed setting is correct, press '!' to return to the
main Setup menu.
2. To change the setting from
vice versa, press
3. Highlight
to return to the main Setup menu.

Changing the Math Coprocessor Setting

If you have not installed an 80287 math coprocessor in your
Equity IIe, you can skip this section.
If you have installed a math coprocessor, you need to change
the coprocessor setting. Follow these steps:
1. At the main Setup menu, highlight
press
Enter.
***** SAVE SETTINGS *****
The current status appears:
Enter.
The current setting appears:
Running the Setup Program
and
to
* * and press
Enter
or
and
2-15