Disk Change Check - Epson Equity IIe User Manual

If you have only one diskette drive, you see a prompt to remove
the the Reference diskette and insert a blank diskette before
running the test. You see these messages:
If using drive 1, remove your Reference Disk.
Insert a formatted blank disk in the drive
before
Any data present may be erased.
Start the check ? (Y/N)
Make sure the blank diskette you prepared is in drive A (1),
then select
each cylinder is tested. For example, with a 1.2MB diskette, the
first message you see is:
Current
After the, test is over, be sure to replace the Reference diskette
in drive A before you select another device from the Device
List.

Disk Change Check

This option tests the ability of a diskette drive to detect
whether a diskette has been inserted or removed. Disk changes
cannot be detected by a 360KB diskette drive.
Select option 4 from the menu to start this test. The program
checks the selected drive type; if it is a 360KB drive, you see
these messages:
Drive d is a
DISK CHANGE is not allowed with this type of
drive.
Press ENTER to return to the menu.
C-26 Performing System Diagnostics
starting
The program displays the current track number as
Y.
track
360
the check.
is 79
KB drive.