Monochrome Display Adapter And Crt Check - Epson Equity IIe User Manual

The program displays your keyboard layout on the screen.
When you press a key on the keyboard, an asterisk appears at
the corresponding location on the keyboard layout. If you hold
a key down, the asterisk begins to blink. If an asterisk does not
appear at the correct location, there is a problem with your
keyboard. Test each key.
You see these messages on the screen:
If all the keys function correctly and match the characters
displayed, press
If all the keys function, but the characters displayed do not
match the keys, press
keyboard test from the Device List, and check that you selected
the correct keyboard layout. You can find diagrams of all the
international keyboard layouts in the MS-DOS Reference
Manual.
If any key is incorrect, press
error code and message, or print them out, and contact your
Epson dealer or service center.

Monochrome Display Adapter and CRT Check

Use this option to verify the operation of a monochrome display
adapter, VGA, or EGA card attached to a monochrome
monitor. This test includes several checks that allow you to
identify particular problems related to the monochrome display.
and then
E Enter.
SC
and then
E
SC
End
Performing System Diagnostics
Then reselect the
Enter.
and Make a copy of the
Enter.
C-11