The program now allows you to edit the table of defective
tracks:
Cylinder
Head
Defective Track Table:
Modify defective track table ? (Y/N)
At the bottom of the table is this prompt:
Select
to leave the table as it is. Then skip the following
section and go on to "Formatting the Disk," below.
To modify the defective track entries, select
Modifying the Defective Track Table
If you select
at the bottom of the table:
Defective Track Table : Move box cursor to desired track with cursor key
A = Add track. C = Change track, D = Delete track, F = Finish editing
Enter command :
To add a bad track, follow these steps:
1.
Press A. You see this prompt:
Cylinder Head
Cylinder
Head
to modify the table, you see the following options
Physically Formatting a Hard Disk
Cylinder Head
Cylinder
-nnnn):
Head
D-7