Inserting And Removing Diskettes - Epson Equity IIe User Manual

Carefully label your diskettes and be sure to indicate the
diskette type and density. Attach labels firmly but gently,
and only along the top of a diskette (next to the
manufacturer's label). Do not stick several labels on top of
one another; too many labels can make it difficult to insert
and remove the diskette in the drive.
It is best to write on a label before you attach it to a
diskette. If you need to write on a label that is already on a
5 i/q-inch diskette, use only a soft-tip pen-not a ballpoint
pen or a pencil.
Store diskettes in a proper location, such as a diskette
container. Do not store diskettes flat or stack them on top
of each other. When you are not using them, be sure to
keep your 5 i/q-inch diskettes in their protective envelopes.

Inserting and Removing Diskettes

To insert a diskette into a 5 '/q-inch drive, hold it with the label
facing up and and the read/write slot leading into the drive.
3-16
Using the Equity IIe