Epson Equity IIe User Manual page 163

2. Insert the working copy of your Reference diskette into
drive A.
3. If necessary, type
4. At the prompt, type
following messages appear:
RampagePlus
5. To configure your computer for use with RampagePlus 286,
press Y. (If you want to exit to MS-DOS without
configuring your computer, press
the MS-DOS
6. Use the SMART setup program now. See your
RampagePlus 286 manual for instructions.
Note
You can also execute CORFIX from your hard disk if you
copied the CORFIX
your
hard disk.
and press
Enter
CORFIX
286.
N.)
prompt and this message:
utility
from the Reference diskette to
to log onto drive A.
and press
Enter.
If you press Y, you see
Installing Options
The
5-23