Epson Equity IIe User Manual page 103

To copy REPORT, FACTS, and MEMO from drive A to a file
named DATA on drive B, type the following and press
COPY A:REPORT + A:FACTS + A:MEMO B:DATA
Remember these rules when using the COPY command:
MS-DOS must be able to find the original file and know
where to store the copy; that is, you may need to specify the
drive (and directory, if necessary) for one or both.
same directory as an existing file.
If there is a file on the destination diskette or directory that
has the same name as the file you are copying, the copy
automatically replaces the existing file. There is no warning
that the existing file is being replaced; so be careful that you
do not accidentally erase a file you want to keep.
If you are copying to a diskette, the diskette must already be
formatted.
Using MS-DOS with Your Equity IIe
Enter:
4-13