Setting The Power-On Password - Epson Equity IIe User Manual

If you have any other combination of monitor and
display adapter card, select
supplied with your display adapter card.
4. After you highlight the appropriate display adapter card
type, press
adapter card setting.
5. Highlight
to return to the main Setup menu.
Enter

Setting the Power-on Password

Setting a power-on password lets you control who can use your
system. However, you do not need to set a power-on password
to use the Equity IIe.
If you set a power-on password, you must enter it the next time
you turn on or reset your computer. If you cannot enter it
correctly, the computer locks up and does not respond to your
keyboard entries. Therefore, if you set a power-on password, be
sure to remember it or write it down and keep it in a safe place.
If you want to use your computer as a network server, you must
turn on network server mode. (A network server is the master
computer in a network which provides storage space for the
other computers connected to it. The network server can write
files to and read files from the other computers in the network.)
To turn on network server mode, you must set a power-on
password.
If you do not want to set a power-on password or turn on
network server mode, skip this section.
In addition, consult the documentation
The screen displays your new display
Enter.
***
Running the Setup Program
***andpress
2-11