Deleting A Power-On Password - Epson Equity IIe User Manual

Press
3. Enter.
computer loads MS-DOS.
To access the computer the next time you turn it on or reset it,
you must enter the new power-on password.

Deleting a Power-on Password

To delete your power-on password, follow these steps:
1. If you do not have a hard disk, insert your Startup diskette
in drive A.
2. Turn on or reset the computer. At the key prompt, enter
your current power-on password followed by a forward slash.
For example, if your password is 123, type:
Press
3. Enter.
the computer loads MS-DOS.
The next time you turn on or reset the computer, it does not
request a password and loads MS-DOS immediately.
3-4 Using the Equity IIe
A happy face character appears and then the
A happy face character appears and then