Formatting Diskettes With A Hard Disk - Epson Equity IIe User Manual

You can reformat previously used diskettes. This process erases
all data on the diskette, so be sure you do not want to save any
of the data on a used diskette before you format it.
If you plan to use a new diskette to make a backup copy of
another diskette, you do not need to use the FORMAT
command to format it first. The DISKCOPY command
automatically formats a blank diskette if it has never been
formatted. (See "Using the DISKCOPY Command," later in
this chapter.)
The formatting procedure you use depends on whether your
computer has one or two diskette drives and whether it has a
hard disk. Follow the instructions below for your configuration.
Also see your MS-DOS Reference Manual for information
about the optional switches you can use with the FORMAT
command to format various diskette types in different types of
drives.
You can also
Epson MENU
because they let you select options from menus instead of
using commands. See your MS-DOS Shell User's Guide and
"Using the

Formatting Diskettes With a Hard Disk

1. If necessary, type
2. At the C> prompt, type
You see this prompt:
4-28 Using MS-DOS with Your Equity IIe
format
diskettes using the MS-DOS Shell or the
program. These programs are easy to use
Epson MENU Program," later in this chapter.
: and press to log onto drive C.
Enter
and press
Enter.