Option 3, Non-Destructive Surface Analysis - Epson Equity IIe User Manual

To flag the error tracks as bad, select
tracks as they are flagged and these messages:
Press
Enter

Option 3, Non-destructive Surface Analysis

The Non-destructive surface analysis does not destroy any data,
and you can use it to safely check the condition of your hard
disk drive. However, this test does not flag any bad tracks it
detects.
To start the test, select
You see these messages:
As the program checks each track, it counts the cylinder
numbers down to zero. When the test is complete, the program
displays a report on the status of the disk, such as the following:
Analysis finished.
Count of tracks flagged bad
Count of tracks with read, verify errors =
Count of good tracks
No read, verify error was detected.
D-12
Physically Formatting
to return to the Hard Disk Format Menu.
3-Non-destructive
from the Hard Disk Format Menu.
a
Hard Disk
You see a list of the
nnnn
=
n
n
= nnnn