Epson Equity IIe User Manual page 46

If the display adapter card type is correct for your system,
you can skip this section.
2. To change the display adapter card setting, press
The cursor block moves into the submenu and you see:
3. Enter
Press
then use ? or 1 to highlight the option that matches your
display adapter card. If you are not sure which one to
choose, follow these guidelines:
If you have a VGA, EGA, or MCGA card, select
compatibility mode provided by the display adapter
card, you may need to set the DIP switches on the card,
which will override the display adapter card setting in
CMOS RAM.)
If you have a color graphics adapter (CGA) or a multi-
graphics adapter (MGA) attached to an RGB (color)
monitor, select
set the color/mono switch on the MGA card to color.)
If you have a composite color monitor, such as a color
television with a video input, try selecting
again and select
If you have a monochrome display adapter (MDA), an
MGA, or a Hercules MGA attached to a monochrome
monitor, choose Monochrome 80
be sure to set the color/mono switch on the MGA card
to mono.)
2-10 Running
to move the cursor block into this submenu and
If the resulting resolution is poor, run Setup
Setup Program
Enter.
(If you are using a
(Also be sure to
(Also