Resuming From an Error
If an error occurs during a test, the test stops at that point,
an error code and error message appear. If you want to record
the problem, you can print out the message on your printer. You
see this prompt:
Do you want a printout of the error
message(s) ? (Y/N)
To continue without printing the error message, select
Before you request a printout, be sure your printer is ready and
contains paper. Then select
following message and prompt appear:
Printer is not installed correctly.
Install correctly before entering.
Continue ? (Y/N)
Correct the problem and select
N
to cancel printing.
After printing the error message, the program displays this
prompt:
Printout is finished. Press ENTER to
return to the menu.
The program continues after an error in one of the following
ways:
an error, the program repeats the test that caused the error.
Performing System Diagnostics
E-8
.
If the printer is not ready, the
Y
Y
to continue printing, or select
and
N.