3.5.2 Serres
Removal
1. Remove the connection angle.
2. Push the support for the Serres
take it out of the guides.
Mounting
1. Attach the support for the Serres
the device. The bars at the support must be fitted to the two guides at the device.
2. Slide the support for the Serres
device. The inlet to the pump must be visible.
3. Connect the vacuum hose with the connection angle.
30
Setting up and starting up
canister system
®
canister system backwards up to the middle and
®
®
canister system forward until it is flush with the
®
canister system in the middle on the right side of