Atmos C 341 Battery Operating Instructions Manual page 25

Connection
1. Connect the vacuum hose to the device.
2. Place the Serres external canister upright into the support. The scale must be
®
visible.
3. Insert the Serres suction bag into the Serres
®
4. Connect the vacuum hose to the Serres
1
5. Check whether the foil of the Serres
external canister and the lid tightly fits to the Serres
6. Connect the disposable suction hose with the angle
7. Close the auxiliary air vent of the fingertip and close the front opening with your
thumb.
8. Switch on the device so that the pump builds up a vacuum.
The Serres suction bag develops.
» ®
9. Insert the suction hose into the hose guide.
10. Wrap the suction hose onto the hose rewind.
11. Perform a function check: Chapter „7.2 Functional check" on page 47.
external canister.
®
outer canister (grey angle
®
2
suction bag is fully inserted into the Serres
®
).
1
external canister.
®
to the Serres suction bag.
2 ®
Setting up and starting up
®
25