Connecting To A Windows Pc - Epson PhotoPC 800 User Manual

Connecting to a Windows PC

You can connect the camera to your USB-enabled
Windows 98 system with either the Windows serial cable or
the USB cable that came with the camera.
If you're using the USB cable and you see the New Hardware
Found screen, follow the instructions on page 1-15.
Using the USB Cable
Follow these steps to connect your camera using the USB
cable:
1
Plug the connector on the USB cable into the USB port
on your computer, or into a port on a USB hub.
6-2 Getting Photos Into Your Computer
NOTE
Although you can use a USB hub, it's recommended that you
connect the camera directly to the computer's USB port.
2
Open the connector cover on the side of the camera.
Then insert the connector on the other end of the USB
cable into the camera's interface port.
3
Turn on the camera by turning the camera dial to .