Installing Batteries - Epson PhotoPC 800 User Manual

NOTE
To keep the charger terminals clean, unplug the charger and wipe
the terminals with a dry cloth. Make sure you charge the batteries
before you use them. If you find that your batteries run out faster
after you recharge them a few times, make sure you discharge
them completely before recharging. If this doesn't help, replace
the batteries.

Installing Batteries

Before you install the batteries, make sure the camera is
turned off.
1
Turn the camera upside down.
2
Hold the battery cover lock down and slide the cover
out to open it.
1-6 Getting Started
battery cover lock