Connecting To A Windows Pc - Epson PhotoPC600 User Manual

When you connect the camera, make sure your system is
not exposed to sources of electromagnetic interference,
such as stereo speakers or the base units of cordless
telephones.

Connecting to a Windows PC

Make sure you have the serial cable that came with your
camera. Before you start, turn off the camera, LCD screen,
and your computer. Then follow these steps:
1
Locate a serial port on the back of your computer. You
may have two serial ports labeled COM1 and COM2, or
the ports may be labeled with icons. If you have two
serial ports available, use COM1 (port 1) to connect
your camera.
NOTE
If you have a 25-pin serial port, you can use a 9- to 25-pin
adapter.
4-2 Getting Photos Into Your Computer
2
Line up the serial connector on the cable with one of the
serial ports on your computer, and insert the connector.
Then tighten the screws.
3
Open the connector cover on the side of the camera.
.