Epson PhotoPC 800 User Manual page 58

This setting is available for all user modes (Full Auto,
Program, and Manual).
1
Open the lens cover and turn the camera dial to
You see the View menu. The current digital zoom
setting appears in the upper right corner.
NOTE
This View menu illustrates what you see if your user mode is
set to Full Auto . Your View menu will look different if the
user mode is set to Program or Manual .
4-6 Using the LCD Menus to Change Settings
2
Press the top button (next to the 1).
The words DIGITAL ZOOM appear on your LCD
. briefly. A yellow frame appears around the previewed
image, and the digital zoom setting changes to 2.
3
Press the shutter button halfway to lock the auto focus.
When the lens locks in focus, the camera status light
digital zoom
stops flashing and you see a green circle
setting
screen. If you want, you can reframe your picture while
you hold the button down.
4
Press the button all the way down to capture the image.
The zoom format remains active until you change it or turn
off the camera.
NOTE
Since the digital zoom mode crops the image and magnifies it, it's
best to print the image in a smaller format.
on the