Getting Pictures Into Your Computer; Connecting To A Windows Pc; Connecting To A Macintosh - Epson PhotoPC 600 Manual

4. Turn on the projector or TV (and VCR) and switch to the
correct video mode.
5. Slide the screen switch on your camera to
last picture you took appears on the TV screen or is
projected. You can use all of the camera's playback features
when your pictures are displayed on TV or projected.
Using the Camera for Presentations
You can create and show a presentation without printing
overhead transparencies or slides, and without a laptop
computer. The EPSON Photo File Uploader lets you transfer
images from your computer to your camera. Anything you can
display on your computer screen can be captured, converted,
and uploaded.

Getting Pictures into Your Computer

When you're finished taking pictures, you can connect the
camera to your computer and transfer the images.

Connecting to a Windows PC

Before you start, turn off the camera, LCD screen, and your
computer. Then follow these steps:
1. Locate a serial port on the back of your computer.
2. Line up the serial connector on the cable with one of the
serial ports on your computer, and insert the connector.
Then tighten the screws.
3. Open the connector cover on the side of the camera.
.
4. Depending on the type of cable you have, line up either the
. The
Playback
5. Turn on the camera and your computer system.

Connecting to a Macintosh

Before you start, turn off the camera, LCD screen, and your
Macintosh. Then follow these steps:
1. Locate the modem port
NOTE
If you are sharing a serial port that you use for another device, make
sure AppleTalk™ is turned off. Your Macintosh may not recognize the
camera if AppleTalk is on.
2. Connect the long cable to the short Macintosh adapter
3. With the arrow on the cable facing up, line up the cable
.
8/97
arrow or the flat side of the cable connector with the mark
on the camera's serial port. Then insert the connector.
back of your Macintosh. You can use either port to connect
the camera.
cable, then tighten the screws.
connector with the port on your Macintosh. Then insert the
connector.
EPSON PhotoPC 600
or printer port on the
Macintosh
adapter
EPSON PhotoPC 600
- 7