Macintosh Systems - Epson PhotoPC 800 User Manual

Macintosh Systems

One of the following systems:
Macintosh PowerPC ™
7.5 or later
Power Macintosh ® G3 with System Software Version
8.51 or later
™
iMac computer with System Software Version 8.1 with
iMac Update 1.0
At least 32MB RAM
At least 30MB free hard disk space
CD-ROM drive
VGA monitor with minimum resolution of 640
Macintosh modem/printer serial port (19200 bps, or
higher) or built-in USB port on an iMac or new
Power Mac G3
16-bit sound card and speakers (for voice annotation
feature only)
with System Software Version
NOTE
If your iMac is running OS 8.1, you must download and install the
iMac Update 1.0 from Apple at http://swupdates.info.apple.com
before you install the PhotoPC 800 software. Contact Apple
Computer if you have problems installing this update or if you
have any questions. If your iMac is running OS 8.5, you do not
need to download and install the iMac Update 1.0. Your operating
system already includes full support for the PhotoPC 800
software. (To find out which operating system your iMac is
running, select About This Computer in the Apple menu.)
480
A
B
Introduction 5