Epson PhotoPC 800 User Manual page 33

4
Follow the instructions on the screen to install Image
Expert. When installation is complete, you return to the
Setup screen.
5
Click the button labeled Install EPSON Photo!3 and
Program Uploader and follow the instructions on the
screen.
6
When you return to the Setup screen, click the Install
EPSON Photo File Uploader button. Follow the
instructions on the screen.
7
When installation is complete, click Exit .
Your camera software is now installed.
Installing Your Windows 98 USB Driver
If you're installing on a Windows 98 system with a USB
port, complete the steps above to install your software. The
first time you connect the camera to your computer with
your USB cable, you'll see the Add New Hardware Wizard.
Click Cancel . (See page 6-2 if you need help connecting the
camera.)
NOTE
You may need your Windows 98 system disk to perform this
installation.
Follow these steps to install the driver for your camera:
1
Insert your PhotoPC 800 CD-ROM in your CD-ROM
drive, if necessary.
2
At the first screen, click Next .
3
Select Search for the best driver for your device ,
then click Next .
4
Select Specify a location and browse to your
CD-ROM drive.
5
Select the Win98E folder if you're installing the English
driver (or the Win98S folder to install the Spanish
driver, or the Win98F folder to install the French
driver). Click OK .
1
A
B
Getting Started 1-15