Using An Optional Tripod; Using A Pcmcia Adapter; Installing The Pcmcia Adapter - Epson PhotoPC 800 User Manual

Using an Optional Tripod

You can use your PhotoPC 800 with any standard tripod.
Follow these steps:
1
Assemble and set up the tripod by following the
manufacturer's instructions. Make sure the tripod is
well-balanced on a flat surface.
2
Find the opening for the tripod screw on the bottom of
your camera. Carefully place the camera on the tripod.
Screw the camera on until it is firmly in place.
3
Adjust the tripod to view your subject as desired.
A-4 Optional Accessories

Using a PCMCIA Adapter

A PCMCIA adapter allows you to access images stored on
CompactFlash cards directly from your computer. To use
this adapter, your computer must be equipped with a Type II
PCMCIA card slot.
If you're using a Macintosh, you must enable PC Exchange
extension software to access files on CompactFlash cards. See
your Macintosh documentation for information.

Installing the PCMCIA Adapter

Follow these steps to install the adapter:
1
Insert the memory card all the way into the adapter.