Epson PhotoPC 800 User Manual page 158

3
Start Image Expert, then select Properties from the
Camera menu. The Camera Properties menu appears:
Enter a new Description of the camera to change
the default. This might be useful if you have more
than one camera and you want to record its
description in your picture data.
Type in the Camera Time box to change the time
and date. Or, click Set Camera to Computer
Time to automatically synchronize your camera to
your computer.
10-6 Operating the Camera From Your Computer
4
Click OK to save your settings and exit the Camera
Properties dialog box.
5
If you want to adjust your port settings, select
Connection from the Camera menu. You see the
Connection dialog box:
If necessary, select a new source. The standard
selection is Serial/USB . If you're using a PCMCIA
adapter to access a PC card slot, select PC Card in
the Connect Via drop-down list. ( FlashPath is
not implemented on the PhotoPC 800.)