NOTE
This View menu illustrates what you see if your user mode is
set to Program . Your View menu will look slightly different if
the user mode is set to Manual .
3
Do one of the following:
If user mode is set to Program, the current sensitivity
setting appears above the ISO button. (See the previous
illustration.) Press the ISO button to change the
sensitivity setting.
4-18 Using the LCD Menus to Change Settings
If user mode is set to Manual, hold down the MENU
button (under PRESS or HOLD ) until you see the
following screen. Press the ISO button to change the
sensitivity setting, then press the MENU button to save
your setting.
sensitivity setting
Adjusting the White Balance Setting
Although the PhotoPC 800 adjusts white balance for you
automatically to ensure color accuracy, you may sometimes
want to change this setting for special effects (for example, to
retain the red tints in a sunset).