Continuous Shooting Using The Timer - Epson PhotoPC 800 User Manual

Continuous Shooting Using the Timer

You can also combine continuous shooting with the timer
for delayed automatic capture of a series of images. This
allows you to photograph yourself in motion.
NOTE
You can capture 10 standard or fine resolution images or 8 super
fine resolution images in eight seconds.
1
Secure the camera on a flat surface or on a tripod. (See
page A-4 for information on attaching the camera to a
tripod.)
2
Open the lens cover, then turn the camera dial to
Wait until the camera status light turns green.
You see a preview of your picture on the LCD screen,
with a red frame around it. CONTINUOUS appears on
the screen.
3
Center your subject in the red frame.
4
Press the timer button.
timer button
The timer icon
indicate that the timer is enabled.
5
Press the shutter button.
.
You have 10 seconds to get ready for "action" in front of
the camera.
The timer icon and the red timer light on the front of
the camera flash slowly for eight seconds. Then they
flash rapidly for two seconds before the shutter is
released.
Using the LCD Menus to Change Settings 4-11
appears on the status display panel to
4
A
B