Epson PhotoPC 800 User Manual page 193

If you are using the AC adapter, make sure it's plugged
into a working outlet.
You can't take a picture with the camera.
The flash may be recharging. Wait until the status light
turns green, and try again.
Make sure you've installed the CompactFlash memory
card in your camera. If it's already installed, you may
need to format or eject it. Check to see if a message is
displayed on the camera's LCD screen.
The CompactFlash memory card may be full. Check the
picture counter on the display panel. Erase some pictures
(see Chapter 5), or transfer the pictures to your
computer and then erase them (see Chapter 6). Or
replace your memory card with a new one.
The camera may be connected to your computer. When
it's connected, you can't use any of the controls on the
camera itself. See Chapter 10 for instructions on taking
pictures from your computer.
Make sure the lens cover is open.
The flash doesn't work.
Make sure the flash is not set to the flash off setting.
Check the batteries and make sure they're installed
correctly. Recharge or replace the batteries if necessary.
You can't use the flash in continuous shoot mode.
Nothing appears on the LCD screen.
Check your batteries and make sure they're installed
correctly. Recharge or replace the batteries if necessary.
Make sure the lens cover is open.
Make sure you've installed and formatted the
CompactFlash memory card.
The camera may have shut off automatically. If your
camera dial is set to or
turn the power back on. If your camera dial is set to
or , press any button on the back of the camera to
turn power on. (You can also turn power on by turning
the camera dial to Off and then back to its former
position.)
Maintenance and Troubleshooting 13-3
, press the shutter button to
13
A
B