Transferring Photos And Sound Files - Epson PhotoPC 800 User Manual

3
Open the connector cover on the side of the camera.
Carefully insert the connector on the other end of the
cable into the camera's interface port.
.
4
Turn on the camera by turning the camera dial to
then turn on your Macintosh system.
On a PowerPC or G3 Macintosh (or a Windows PC with a
high-speed serial board), you may be able to transfer your
pictures at the rate of 230.4KB per second. If your camera
software doesn't set this speed automatically, you can set it
manually. See page 10-6.

Transferring Photos and Sound Files

The PhotoPC 800 provides several different ways to transfer
your pictures from the camera's memory card to your
computer. The simplest method is to use the Image Expert
software that came with your camera. This lets you view
small thumbnail images of your pictures, and then quickly
transfer them to an album (folder) on your hard disk drive.
If you haven't installed your software, do it now. (See
Chapter 1.) Make sure the camera is connected to your
computer and the camera dial is turned to
,
.
Getting Photos Into Your Computer 6-5
6
A
B