Adjusting Camera Settings From Your Computer; Changing Settings With Image Expert - Epson PhotoPC 800 User Manual

You can use the Mode , Flash , Self Timer , and
Macro controls on the screen to adjust these settings
just as you would by using the buttons or LCD menus
on the camera. (For information about using the
camera's buttons, see Chapter 3. For information about
using the LCD menus, see Chapter 4.)
6
When your shot is ready, click Take a Picture . The
image is captured and processed.
7
Click Close when you're finished taking pictures from
your computer.
The Auto-Stop Timer shuts off the live preview after one
minute to save battery power. You can set the timer from
30 seconds to 5 minutes.
Adjusting Camera Settings From
Your Computer
You can use either Image Expert or EPSON Photo!3 to
change the following camera settings:
Time
Date
Power down time (Image Expert only)
Camera ID
Connection Port
Connection Speed

Changing Settings With Image Expert

You can change settings in Image Expert while you're
viewing pictures in the camera. Follow these steps:
1
Connect the camera to your computer as described in
Chapter 6.
2
Turn the camera dial to
system.
Operating the Camera From Your Computer 10-5
, then turn on your computer
10
A
B