Connecting To A Macintosh; Getting Pictures Into Your Computer; Connecting To A Windows Pc - Epson PhotoPC 750Z User Manual

Epson photopc 750z: product information
Hide thumbs Also See for PhotoPC 750Z:
Table of Contents

Advertisement

EPSON PhotoPC 750Z
5. Turn the camera dial to
appears on the TV screen. You can use all of the camera's
playback features when your pictures are displayed on TV.
Using the Camera for Presentations
You can connect your camera to a multimedia projector or
television and show not just photos, but also text and graphics.
The EPSON Photo File Uploader lets you transfer images
from your computer to your camera. Anything you can
display on your computer screen can be captured, converted,
and uploaded. You can create and show a presentation
without printing overhead transparencies or slides, and
without a laptop computer.

Getting Pictures into Your Computer

When you're finished taking pictures, you can connect the
camera to your computer and transfer the images.

Connecting to a Windows PC

Before you start, turn off the camera and your computer.
Then follow these steps:
1. Locate a serial port on the back of your computer.
2. Line up the serial connector on the cable with one of the
serial ports on your computer, and insert the connector.
Then tighten the screws.
3. Open the connector cover on the side of the camera.
.
8 - EPSON PhotoPC 750Z
. The last picture you took
Play
4. Line up the arrow (flat side) of the cable connector with the
mark on the camera's serial port. Then insert the connector.
5. Turn on the camera and your computer system.

Connecting to a Macintosh

Before you start, turn off the camera and your Macintosh.
Then follow these steps:
1. Locate the modem port
back of your Macintosh. You can use either port to connect
the camera.
Note:
If you are sharing a serial port that you use for another device,
make sure AppleTalk™ is turned off. Your Macintosh may not
recognize the camera if AppleTalk is on.
2. Line up the arrow on the cable connector with the port icon
on your Macintosh. Then insert the connector.
.
3. Open the connector cover on the side of the camera.
4. Line up the arrow (flat side) of the cable connector with the
mark on the camera's serial port. Then insert the connector.
5. Turn on the camera and your Macintosh system.
1/99
or printer port
on the

Advertisement

Table of Contents
loading

Table of Contents