Checking The Picture Counter - Epson PhotoPC 800 User Manual

You need to recharge or replace the batteries or use the
optional universal AC adapter when you see the low battery
icon. Although you may be able to use the camera with low
batteries, it needs full battery power to operate reliably.
Several factors can affect battery life, including the
surrounding temperature and the type of batteries you use.
Low temperatures—especially below 50 °F (10 °C)—drain
batteries faster. See page 1-4 for battery use instructions.

Checking the Picture Counter

The large number in the lower right of the status display
panel shows how many additional pictures you can take.
This number is affected by the image quality setting. Also,
if you have any voice recordings stored on your memory
card, the number on the display panel may be greater than
the actual number of remaining pictures.
When the memory card is full, the number on the display
panel reads 0 , the status light on the back of the camera
flashes red, and you can no longer use the shutter button.
Before you can take any more pictures, you need to delete
some of the images on the memory card. (See page 5-4 for
instructions.)
If you want to save your photos before you delete them,
connect the camera to your computer and transfer the
pictures as described in Chapter 6.
Instead of the number of pictures remaining, you may see
one of the following in the lower right corner of the status
display panel:
In quick shot mode, the number of photos
taken is displayed in brackets.
In Program or Manual mode, the exposure
value appears on the left and the shutter
speed appears on the right when you hold the
shutter button down halfway. See page 4-2
for more information about user modes.
2
A
B
Taking Pictures 2-3