Table of Contents
Advertisement
Commissioning
6.4.3 Windows XP, Windows 2000
1. Start the computer.
2. In Windows, select "Start > Settings > Network connections".
3. Double-click the LAN connection via which the Sunny WebBox is connected.
– If Windows displays several LAN connections, there are probably several network
connections installed on the computer. Ensure that you select the correct network connection,
with which the computer is connected to the Sunny WebBox. If necessary, refer to the
manual of your computer.
– In the event that no LAN connection is displayed, please refer to section 11.1 "General
Troubleshooting for the Sunny WebBox" (page 53).
☑ The "LAN Connection Status" window opens.
4. Select [Properties] on the "General" tab.
☑ The "Local Area Connection Properties" window is
displayed.
5. Select "Internet protocol (TCP/IP)" and select
[Properties].
☑ The window "Internet Protocol (TCP/IP)
Properties" opens.
6. Note the current network settings in the "Internet Protocol (TCP/IP) Properties" window. This will
enable you to reset the computer network settings after configuration of the Sunny WebBox.
30
SWebBox20-eng-IUS111411
SMA America, LLC
Installation Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the SUNNY WEBBOX Bluetooth Wireless Technology and is the answer not in the manual?
Questions and answers