Setting The Http Port; Setting The Nat Port - SMA SUNNY WEBBOX Bluetooth Wireless Technology Installation Manual

Extended Configuration
7.1.4 Setting the HTTP Port
Adjusting the network ports
Changing the ports is only necessary in rare cases. Before adjusting the ports, contact your
network administrator.
The HTTP port is the network port at which the Sunny WebBox user interface is available. The HTTP
Port is set to 80 by default. Should another port be entered, it should be explicitly specified when the
user interface is invoked.
Example: The Sunny WebBox IP address is 192.168.0.168 and the HTTP port was changed to
8080; thus "http://192.168.0.168:8080" must then be entered in the address bar of the web
browser.
1. Select the Sunny WebBox in the plant tree and select "Settings" in the device menu
or
Click the button "Settings" in the toolbar.
2. Select the "External Communication > HTTP" parameter group.
3. Select [Edit].
4. Enter the required port in the "Port" field. (Status upon delivery: Port 80)
5. Select [Save].
☑ The HTTP port is saved.
7.1.5 Setting the NAT Port
Adjusting the network ports
Changing the ports is only necessary in rare cases. Before adjusting the ports, contact your
network administrator.
During data transmission, the Sunny WebBox sends the IP address and port at which the Sunny
WebBox is available on the Internet to the Sunny Portal. For this, the respective port must be released
by the router. If the NAT (Network Address Translation) in the router is changed, you must specify the
network port set in the router. The NAT Port is set to 80 by default.
1. Select the Sunny WebBox in the plant tree and select "Settings" in the device menu
or
Click the button "Settings" in the toolbar.
2. Select the parameter group "External Communication > Ethernet > Nat".
3. Select [Edit].
4. Enter the required port in the "Port" field.
5. Select [Save].
☑ The NAT port is saved.
38 SWebBox20-eng-IUS111411
SMA America, LLC
Installation Guide