Table of Contents
Advertisement
Commissioning
6.4 Configuring Network Settings on the Computer
6.4.1 Information on Network Settings on the Computer
Before you can operate the Sunny WebBox for the first time without the Sunny WebBox Wizard, you
must set the computer to the network area of the Sunny WebBox in its delivered status. Read the
section which relates to the operating system of your computer. If you use an operating system that is
not described, refer to the manual of your operating system to find out how to set the computer to IP
address 192.168.0.100 and the Subnet mask to 255.255.255.0. You can then configure the Sunny
WebBox for a local network from the user interface (see page 33).
User rights in the operating system
You need the respective user rights on the computer used to commission the Sunny
WebBox, in order to be able to make changes to the network settings. If you have any
questions, consult your system administrator.
6.4.2 Windows 7, Windows Vista
1. Start the computer.
2. In Windows select "Start"
3. Enter "ncpa.cpl" in the search field and press Enter.
☑ The "Network Connections" window opens.
4. Double-click the LAN connection via which the Sunny WebBox is connected.
– If Windows displays several LAN connections, there are probably several network
connections installed on the computer. Ensure that you select the correct network connection,
with which the computer is connected to the Sunny WebBox. If necessary, refer to the
manual of your computer.
– If no LAN connection is displayed, please refer to section 11.1 "General Troubleshooting
for the Sunny WebBox" (page 53).
☑ The "Local Area Connection Status" window opens.
5. Select [Properties] on the "General" tab.
28
SWebBox20-eng-IUS111411
SMA America, LLC
Installation Guide
Advertisement
Table of Contents
