Decommissioning; Disassembling The Sunny Webbox - SMA SUNNY WEBBOX Bluetooth Wireless Technology Installation Manual

Device for plant monitoring with bluetooth wireless technology
Table of Contents

Advertisement

SMA America, LLC
10 Decommissioning
10.1 Disassembling the Sunny WebBox
NOTICE
Loss of plant data possible!
Only disconnect the Sunny WebBox from the power distribution grid when the PV plant is
not in operation (e.g. at night). Otherwise, losses may occur during the recording of the
plant data.
NOTICE
Loss of data on the SD card possible
Do not disconnect the Sunny WebBox from the power distribution grid while the "SD
CARD" LED is flashing green or orange. This can damage the file system of the SD card
and lead to data loss. Depending on the amount of data, the writing process can take some
time.
1. Remove the plug-in power supply of the Sunny WebBox from the socket outlet.
2. Remove the DC plug of the plug-in power supply from the enclosure.
3. Remove the Sunny WebBox network cable.
4. Depending on the mounting type, dismount the Sunny WebBox as follows:
Wall mounting
Installation Guide
SWebBox20-eng-IUS111411

Decommissioning

51

Advertisement

Table of Contents
loading

Table of Contents