4-6.5.1 Via Onchip Ide Device - SOLTEK SL-PT880E-R Manual

4-6.5.1 VIA OnChip IDE Device

Choose "VIA OnChip IDE Device" in "Integrated Peripherals" and press
<Enter>. The following sub-screen will appear for VIA OnChip IDE
Device configuration:
Phoenix - AwardBIOS CMOS Setup Utility
OnChip SATA/RAID
IDE DMA transfer access
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
IDE HDD Block Mode
On-Chip SATA/RAID South Bridge VT8237 supports Serial ATA and
IDE DMA transfer
access
On-Chip IDE Channel
IDE Prefetch Mode The on-board IDE drive supports IDE prefetching
Primary
Master / Slave PIO
Secondary
Master / Slave PIO
VIA OnChip IDE Device
Enabled
Enabled
Enabled
Enabled
Enabled
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Enabled
RAID function. This item allows you to enable/
disable onboard SATA/RAID function.
This item is to improved the whole system per-
formance with DMA mode of IDE devices
enabled.
The chipset contains a PCI IDE interface with
0/1 support from two IDE channels. Select Enabled
to activate the first and/or the second IDE
interface. Select Disabled to inactivate an inter-
face if you install a primary and/or second add-
on IDE interface.
for faster drive accesses. If the IDE device doesn't
support prefetching, set this field to Disabled.
Choose Auto or Mode 0~4. The BIOS will detect the
HDD mode type automatically when you choose
Auto. You need to set to a lower mode than Auto
when your hard disk becomes unstable.
69
Chapter 4 BIOS Setup
Item Help