Other Connectors Configuration; 2-10.1 On Board Fan Connectors - SOLTEK SL-PT880E-R Manual

2-10 Other Connectors Configuration

This section lists out all connectors configurations for users' reference.

2-10.1 On Board FAN Connectors

PS/2 Mouse
(on top)
Fan1
PS/2 Keyboard
USB0 USB0
(underside)
(on top) (on top)
USB1 (underside)
PW1
+12V Power
PW2
RJ45
Main Power
(on top)
USB2 (middle)
USB3
(underside)
Fan2
1
JAUD1
1 JCLK1
1 JCLK2
CD-IN1
1
VIA
VT6103
VIA
VT1616
RT2
ITE
IT8705F
BIOS
Fan3
JKB1
1
Both Sensor and No-sensor Fan Connectors support CPU/AGP/Sys-
tem/Case cooling fan with +12V mode. A Hardware Monitor chipset is
on board, with which users can install a Hardware Monitor Utility and
read the fan speed transmitted from the sensor fan. Otherwise, users
can read the fan speed from the "Hardware Monitor Status" via BIOS.
A running Fan will send out 2 electric pulses per rotation of its fan
blade. A Sensor Fan Connector will count the electric pulses and send
the information to the System Hardware Monitor which in turn will work
out the fan rotation speed and display it on screen.
VIA
PT880
AGP 8X/4X
IDE2 IDE1
PCI 1
PCI 2
VIA
PCI 3
ATA1 ATA2
VT8237
1
PCI 4
Li
PCI 5 Battery
JBAT1
NJ1
1 FDD1
USB2 USB3
1 1 1
Chapter 2 Hardware Setup
Sensor
+12V
GND
Sensor Conn.
FAN1, yellow, sensor
FAN2, white, no sensor
FAN3, yellow, sensor
1
29
Void
+12V
GND
No Sensor