4-6.5.3 Superio Device - SOLTEK SL-PT880E-R Manual

SL-PT880E-R/PT880E-RL

4-6.5.3 SuperIO Device

Choose "SuperIO Device" in "Integrated Peripherals" and press <Enter>.
The following sub-screen will appear for SuperIO Device configuration:
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
x UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DM A
Onboard FDC
Controller
Onboard Serial
Port 1 / Port 2
UART Mode Select The serial port 2 on your system may offer a va-
Phoenix - AwardBIOS CMOS Setup Utility
SuperIO Device
Select Enabled if your system has a floppy drive
controller (FDC) installing in the system board and
you want to use it. If you install add-in FDC or the
system has no floppy drive, select Disabled in this
field.
Choices: Enabled; Disabled
Select a logical COM port name and matching
address for the first and second serial ports.
Select an address and corresponding interrupt
for the first and second serial ports.
Choices: Disabled; Auto;
3F8/IRQ4; 2F8/IRQ3;
3E8/IRQ4; 2E8/IRQ3
riety of infrared port modes. Click here for a de-
scription of various modes.
The choices: Normal; IrDA; ASKIR; SCR
72
Enabled
Auto
Auto
Normal
Half
378.IRQ7
SPP
3
Item Help