4-6.4.2 Agp & P2P Bridge Control - SOLTEK SL-PT880E-R Manual

4-6.4.2 AGP & P2P Bridge Control
Choose "AGP & P2P Bridge Control" in "Advanced Chipset Features"
and press <Enter>. The following sub-screen will appear for AGP &
P2P Bridge Control configuration:
AGP Aperture Size
AGP3.0 Mode
AGP Driving Control
x AGP Driving Value
AGP Fast Write
AGP Master 1 WS Write
AGP Master 1 WS Read
AGP 3.0 Calibration cycle
DBI Output for AGP Trans.
DBI Output for Frame Trans
AGP Aperture Size Series of options are available: 4, 8, 16, 32, 64, 128
AGP3.0 Mode This item allows you to select AGP Mode.
AGP Driving Control This item allows you to adjust the AGP driving force.
AGP Driving Value This item allows you to adjust the AGP driving force.
AGP Fast Write This item will enable the AGP model into fast write
AGP Master 1 WS
Write
AGP Master 1 WS
Read
AGP & P2P Bridge Control
64M
4X
Auto
DA
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
or 256 MB. Memory mapped and graphics data
structures can reside in a Graphics Aperture. This
area is like a linear buffer. BIOS will automatically
report the starting address of this buffer to the O.S.
Choices: 1X; 2X; 4X; 8X
Choose Manual to key in a AGP Driving Value in the
next selection. This field is recommended to set in
Auto for avoiding any error in your system.
Choices: Manual; Auto
Choices: Min=0000 ~ Max=00FF
mode.
Leave this field at default.
Leave this field at default.
65
Chapter 4 BIOS Setup
Item Help
Menu Level