4-6.7 Pnp / Pci Configuration - SOLTEK SL-PT880E-R Manual

SL-PT880E-R/PT880E-RL

4-6.7 PnP / PCI Configuration

PnP/PCI Configuration allows you to modify the system's power saving
functions.
Run the PnP/PCI Configuration as follows:
Choose "PnP/PCI Configuration" from the Main Menu and a screen with
a list of options will appear:
PNP OS Installed
Reset Configuration Data
Resources Controlled by
x IRQ Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
: Move Enter: Select
F5: Previous Values
PNP OS Installed Select Yes if the system operating environment is
NOTE: BIOS will automatically disable all PnP resources except
the boot device card when you select Yes on Non-PnP oper-
ating system.
Reset Configuration
Phoenix - AwardBIOS CMOS Setup Utility
PnP PCI Configurations
No
Disabled
Auto(ESCD)
Press Enter
Disabled
Enabled
Enabled
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Plug-and-Play system (e.g., Windows98).
Normally, you leave this Disabled(default). Select
Data Enabled to reset Extended System Configuration
Data (ESCD), when you exit Setup if you have in-
stalled a new add-on and the system reconfiguration
has caused such a serious conflict that the operat-
ing system cannot boot.
80
Item Help
Esc: Exit F1: General Help
F7: Optimized Defaults