Replacing Ink Cartridges - Epson Stylus Pro 7600 Quick Reference Manual

Before you begin a large print job, you should check
your ink levels. If one of your cartridges is low, you
can replace it before you start. Or you can wait until
the ink runs out, replace the cartridge, and then
continue the job without any loss of print quality.
Checking Ink Levels
The easiest way of checking ink levels is from
the control panel.
* If your printer uses EPSON UltraChrome™ ink, the black ink cartridges may be either Photo Black, Matte Black, or Light Black. See
your Printer Guide for more information on switching between black print modes.
EPSON Photographic Dye
Black
Cyan
Magenta
Yellow
Light Cyan
Light Magenta
EPSON UltraChrome ink
Photo Black
Cyan
Magenta
Yellow
Light Cyan
Light Magenta
Light Black
Matte Black
black*
black*
cyan
magenta
light cyan
light magenta
yellow
™ ink
110 ml
T545100
T545200
T545300
T545400
T545500
T545600
110 ml 220 ml
T543100 T544100
T543200 T544200
T543300 T544300
T543400 T544400
T543500 T544500
T543600 T544600
T543700 T544700
T543800 T544800
(full)

Replacing Ink Cartridges

When one of the Ink Out lights is flashing and INK LOW is
displayed on the control panel, the corresponding cartridge is
nearly empty. Make sure you have the correct replacement
cartridge.
If you have a Stylus Pro 9600 that uses EPSON UltraChrome
ink, you can install any combination of 110 ml and 220 ml
cartridges. Unless you are planning to switch between black
print modes (see your Printer Guide for details), be sure to
replace the black ink cartridges with the same colors as you are
currently using.
5 5
(almost empty)
Continue