62
|
Handling Paper and Other Media
Tip: You can use
Maintenance mode to
switch the units of
measurement in the
printer from meters to
feet. See page 164 for
instructions.
Downloaded from ManualsPrinter.com Manuals
6. Press u to go back to
7. Press d to select
ROLL PAPER LENGTH
8. Press r, then select the length of the roll paper loaded in the printer,
from 15 to 300 ft (5 to 99.5 m), then press
9. Press l, then press d to select
10. Press r, then select the length at which you want to receive an alert
message, from 3 to 50 ft (1 to 15 m), then press
11. Press
to exit the menu.
Placing the Paper in the Printer
1. Open the roll paper cover.
62
REMAINING PPR SETUP
.
OK
ROLL LENGTH ALERT
.
.
.
.
OK