Changing The Date And Time; Using Maintenance Mode - Epson STYLUS Pro WT7900 User Manual

92 | Maintaining and Transporting the Printer
Tip: You can use the
Printer Setup menu to
enable the roll paper
counter, paper size
check, and several other
printer features (see
page 128).
You can also use the
EpsonNet Config utility to
set up a time server. This
disables the CLOCK
SETTING menu.

Changing the Date and Time

1. Press r .
Menu
2. Press d until
MAINTENANCE
3. Press d until you see
4. Use the d, u, and r buttons to set each item in the date and time,
displayed in the following format:
5. Press to save the setting, then press
OK

Using Maintenance Mode

Maintenance mode lets you make special settings and perform maintenance
procedures that may be needed occasionally. You can use maintenance mode
to do the following:
Change the language or units of measurements used on the printer's
•
control panel menus.
Adjust the maximum value for roll paper tension.
•
Run a "super strong" cleaning cycle
•
Change the number of cleaning cycles the printer automatically
•
performs when it detects clogged nozzles.
Return all of the printer's control panel settings to their default values.
•
Follow these steps to use maintenance mode:
1. Make sure the printer is turned off.
2. Press and hold the
hold it until the printer turns on and the LCD displays
MAINTENANCE MODE.
is highlighted, then press r.
CLOCK SETTING
MM/DD/YY HH:MM
button, then press the P power button and
92
, then press r
.
.
to exit the menu.