Table of Contents
Advertisement
Teldat S.A.
3.6.2 WAN connection
The RXL14000 has 1 Ethernet interface for WAN connection. This port has 2 connectors – SFP for optical link and
RJ45 for 10/100/1000 Base-T link – but they cannot operate simultaneously. This interface is totally independent
from the Switch and is handled as just one more interface.
Please pay careful attention to the labeling to avoid confusing these ports with other types of ports:
WAN connectors
Fig. 7:
Note
During booting and in BIOS mode, the WAN connectors will not work.
3.6.3 Connecting a USB device (USB connector)
The RXL14000 has a USB HOST 2.0 Type A connector interface, to connect USB devices. The interface can be ac-
tivated by purchasing the corresponding software license.
USB Connector
Fig. 8:
3.6.4 Connecting for configuration
The RXL14000 has an RJ45 female connector (labeled Aux) on the front panel that provides access to the device's
local console.
For further information, please see
Aux Connector
Fig. 9:
RXL14000
Connecting to the device
on page 14.
3 Components and Power Supply
9
Advertisement
Table of Contents
Need help?
Do you have a question about the RXL14000 and is the answer not in the manual?
Questions and answers