To Install Usb 2.0 Driver For Win2000 Or Winxp - SOLTEK 85MR3-R Manual

3-9 To Install USB 2.0 Driver for Win2000 or WinXP

USB V2.0 with its 480Mb/s transfer rate supports operating system
Win2000 and WinXP with Intel USB drivers and Microsoft USB drivers.
USB Driver installation procedures are of similar steps in Win2000 and
WinXP. The point is the Intel USB drivers are already open to Intel
Chipset users, while Microsoft USB drivers are to be found in the Win
2K and Win XP Service pack. Users should install the latest Service
Pack for Win 2K or Win XP before installing the Intel USB2.0 driver.
The following procedures are for installation of USB2.0 drivers on both
Win 2K and Win XP:
1. In Win2000 or WinXP, install the latest Service Pack version into the
operating system ( the latest Service Pack can be found in Microsoft
Web Site).
2. After installation of the Service Pack, insert the Mainboard Support
CD into CD-ROM for installation of the USB2.0 driver.
3. Take the following path to search for the USB 2.0 driver for installation:
\My Computer(right click of Mouse)\Properties\
Hardware\Device Manager\
Universal Serial Bus(USB) Controller (left double click of Mouse)\
Driver\Update Driver\
4. Instantly the "Upgrade Device Driver Wizard" will show up on screen.
Click "Next" to continue.
5. Instantly, the Wizard Program will guide you through to search for
the USB driver.
6. The following "Upgrade Device Driver Wizard" screen will appear.
Tick "Specify a Location" and mouse click "Next" button to continue.
Chapter 3 Software Setup
"Specify a Location" of
driver in "Win2000".
"Specify a Location" of
driver in "WinXP".
61