SOLTEK 85MR3-R Manual page 97

11. Insert the "FastTrak 376 Driver" diskette into the A: drive.
12. Press the "Next" button. A message informing you that Windows 98
has found "Win95-98 Promise FastTrak 376 (tm) Controller"
should appear.
13. Press "Next," then "Finish," then "Yes" when asked if you want to restart
your computer. Be sure to remove the diskette from drive A:.
5-2.2-3 Windows 95
1. Connect your hard drive(s) for RAID Array to IDE3/ATA1/ATA2, and
enable FastTrak 376 Controller with Jp15. Configure the hard drive(s)
for RAID Array, partition and format your hard driver(s).
2. Install Windows 95 normally.
3. After installation, go to "Start" menu and choose "Settings."
4. Form the "Settings" menu, choose "Control Panel."
5. In the "Controller Panel" window, double-click on the "System" icon,
6. In the "System" window, choose the "Device Manager" tab.
7. In the hierarchical display under "Other Devices" is a listing for "PCI
RAID Controller." Choose it and then press the "Properties" button.
8. Choose the "Driver" tab in the "Properties" window, and then press the
"Update Driver" button.
9. When asked if you want Windows to research for the driver, choose
"Yes (recommended)."
10. Insert the "FastTrak 376 Driver" diskette into the A: drive, then
press "Next."
11. When Windows informs you that it was unable to find the drivers, press
"Other Locations..."
12. In the "Select Other Location" dialog box, type "A:\WIN9x-ME".
13. Press "Next" button. A message informing you that Windows 95 has found "
Win95-98 Promise FastTrak 376 (tm) Controller" should appear.
14. Press "Finish." (If Windows can't find the "FastTrak 376.MPD" file,
type "A:\WIN9x-ME" in the copy files from:" text box).
15. Choose "Yes" when asked if you wish to restart the system, and remove
the diskette from Drive A.
Chapter 5 RAID Controller
103