Chapter 2 Hardware Setup - SOLTEK 85MR3-R Manual

85MR3-R / 85MR3-RL

Chapter 2 Hardware Setup

To Get Things Ready for Hardware Setup !
1. We recommend to install your CPU before any other components.
For detailed installation instructions of processor, you can also refer
to the pamphlet enclosed in your CPU package.
2. Installing a cooling fan with a good heat sink is a must for proper
heat dissipation for your CPU. Get ready an appropriate fan with
heatsink for proper installation. Improper fan and installation will
damage your CPU.
3. In case CPU Vcore, CPU clock or Frequency Ratio is adjustable on
board, please follow the instructions described in the User's manual
for proper setup. Incorrect setting will cause damage to your CPU.
The following topics are included in this chapter:
2-1 Pentium 4 CPU Installation
2-2 Pentium 4 CPU Fan Installation
2-3 Memory Installation
2-4 VGA/AGP 4X Installed with Jumper and LED
Safeguard
2-5 IDE Connector Installation
2-6 Floppy Disk Connector (FDC) Installation
2-7 ATX 2.03 Power Supply Installation
2-8 Jumper Settings
2-9 Other Connectors Configuration
18